About Software Download

NR-EN16 Main Unit Operation Software (Firmware)

Latest Update:

July 20, 2022

Version:

R1.01.00

Necessary preparations:

• NR-X100 and NR-XU1 or NR-500 and NR-U5
• NR-EN16
• USB cable included with the NR-X100 or NR-500
• PC

Note:

Do not turn the target device off during the update process.

Download the update file:

1. Create a new folder on the hard disk.
2. 点击“下载”下载站点。“文件Download” dialog box will be displayed.
3. Click “Save.” The “Save As” dialog box will be displayed.
4. Specify the folder created in (1) as the “Save Location,” and then click “Save.” The update file is downloaded.
5. Right-click the downloaded update file, and then click “Extract All...” The “Extract Compressed (Zipped) Folders” window is displayed. To specify the destination folder, click “Browse” and specify the location where the extracted file will be saved.
6. Click “Extract” to start the extraction.
7. When the file is successfully extracted, the following file is created within the specified folder. Depending on the PC settings, the extension may not be displayed.
   • NREN16_UPDATE.bin

Update process:

Refer to the NR-X100 User’s Manual or the NR-500 User’s Manual for the update procedure.

Main changes/revision history:

• [Changes from R1.00.** -> R1.01.**] July 20, 2022

  Added Functions

  • The following functions have been added.
    • The FD-H Series, FI-1000, and FI-T Series have been added to the connection target devices.