CAN data collection unitNR-C512

NR-C512 - CAN data collection unit

Specifications

Model		NR-C512^*1
Protocol	Supported protocol	CAN Ver. 2.0B
	Supported physical layers	High speed: ISO 11898 Single wire: SAE J2411
	Communication speed	High speed: 60 kbps to 1 Mbps Single wire: 20 to 83.3 kbps
Port	Number of ports	1 port^*2
	Design	9-pin D-sub male
Maximum number of messages/maximum number of signals		128 messages/port, 512 signals (ch)/port
Collection period		Maximum sampling cycle: 200 µs
Power source for the CAN bus		High speed: 5 V internal supply Single wire: +6.5 to +18 V, 100 mA external power supply required
Built-in termination resistor		High speed: 120 Ω × 2 (enabled/disabled with DIP switch) Single wire: 9.1 kΩ
Manual transmission/reception		Transmission/reception by specifying message ID and data
Withstand voltage	Measurement input terminal - System bus	300 VAC (50/60 Hz) for 1 minute
Rating	Power consumption	1.6 W or less
Environmental resistance	Ambient temperature	0 to +40°C32°F to 104°F
	相对湿度	10 to 85% RH (no condensation)
Weight		Approx. 150 g5.30 oz
^1High speed and Single wire modes cannot be used at the same time. ^2Max. expansion: 8 ports (with 8 units connected, using NR-X100W), 4 ports (with 4 units connected, using NR-500). Up to 4 units can be connected for each NR-X100W and NR-XR01 group (or 2 units for each group when using 5 or more NR-XR01 devices), with up to 8 units for all groups.