Clamp-On Flow Sensor
FD-H series
让步ntration Sensors Probe typeFI-C20D
Specifications
Model |
FI-C20D |
|||
Type |
Probe type |
|||
Attachment |
— |
|||
Detection principle |
Refractive index (surface light source) |
|||
Rated concentration range |
Brix: 0–20% (nD: 1.32500–1.37000) |
|||
Display method |
Status indicator light |
|||
Display range |
Brix: 0–25% |
|||
Supported fluids |
Non-corrosive aqueous solutions (such as water-soluble coolants, mold release agents, etc.)*1 |
|||
Supported fluid temperature |
0–70°C32–158°F(no freezing) |
|||
Connection diameter |
— |
|||
Rated pressure range |
||||
Pressure resistance |
||||
Display resolution |
Brix: 0.01/0.1% (default value: 0.1) |
|||
Response time |
1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s |
|||
Measurement accuracy |
Brix: ±0.2%*2*3(nD: ±0.0003) |
|||
让步ntration unit |
Brix nD*4 |
|||
Temperature measurement accuracy |
±1.0°C1.8°F*2 |
|||
Power supply |
Current consumption |
25 mA or less |
||
Environmental resistance |
Enclosure rating |
IP65/IP67 (IEC60529) |
||
Ambient temperature |
–10 to +60°C14 to +140°F(no freezing) |
|||
相对湿度 |
35–85% RH (no condensation) |
|||
Vibration resistance |
10–500 Hz; Power spectral density: 0.816 G2/Hz; X, Y and Z directions |
|||
Shock resistance |
100 m/s2(approx. 10 G), 16 ms pulses, 1000 times each for X, Y and Z directions |
|||
Material |
Liquid end materials |
Sensor element: synthetic quartz |
||
Other materials |
Indicator light: PPSU / TPU / PBT |
|||
Weight |
Approx. 480 g16.93 oz |
|||
*1Use water as the solvent, and use materials that are soluble in water. If the particles are not water soluble, such as with slurry, the refractive index may not change. |
||||