Main Unit, Landscape, 5 L/min, PNPFD-M5AYP

FD-M5AYP - Main Unit, Landscape, 5 L/min, PNP

Data Sheet (PDF)

Manuals

Specifications

Model		FD-M5AYP^*1
Type		For horizontal piping
Shape		Built-in amplifier
Rated flow range		0.25 to 5 L/min^2^3
Possible display range		0.15 to 10 L/min^*4
Possible ranges to set		0 to 10 L/min
Zero-cut flow rate		0.15 L/min^*5
Connection port		Rc3/8 (10A)
Detectable fluids		Water or non-corrosive liquid
Conductivity of detection fluids		5 µS/cm or higher
Detection fluid temperature		0 to 85°C32 to 185°F, (No freezing)
Pressure loss		0.01 MPa or less
Display method		Dual row display with 4-digit, 7 segment LED, bar display (2 colors), output indicators, flow indicator
Display resolution		0.05^*6/0.1 (L/min) selectable
Repeatability		0.5 s : ±5% of F.S.10 s : ±1% of F.S.1 s : ±3.5% of F.S.30 s : ±0.8% of F.S.2.5 s : ±2.5% of F.S.60 s : ±0.6% of F.S.5 s : ±1.6% of F.S.^*7
Hysteresis		Variable
Response time (chatter prevention feature)		500 ms/1 s/2.5 s/5 s/10 s/30 s/60 s variable
Accumulated flow unit		0.01/0.1/1/10/100 (L) selectable
Integration data storage cycle		Save to memory every 10 seconds
Memory backup		EEPROM (Data storage length : 10 years or longer, Data read/write frequency : 1 million times or more)
Control output		PNP open collector, max. 100 mA/ch^*8(30 V or less), residual voltage 1 V or less, 3 outputs (N.O./N.C. switchable)
Analog output		4-20 mA, max. load resistance 260Ω, Analogue output range can be set to any value
Integration reset/bank switch input/flow zero function input		Input time : 20 ms or greater, Either accumulation reset or bank switching mode can be selected
Power consumption (Current consumption)		Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)
Rating	Power voltage	24 VDC, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating	IP65
	Pressure resistance	2.0 MPa
	Applied pressure range	1.0 MPa或莱斯s
	Ambient temperature	0 to +50 °C32 to 122 °F(No freezing)
	相对湿度	35 to 85 % RH (No condensation)
	Vibration resistance	10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions
Material	Liquid end materials	Bore : SCS13, Measurement pipe : PPS, O ring : fluoro-rubber (FKM)
	Other materials	Plastic case areas : PPS, Metal case areas : SUS430, Cable : PVC
Accessory		Instruction manual
Weight		Approx. 835 g
^1The models with “A” at the end of the name have additional functions such as display averaging. ^2The rated flow range indicates the range that is supposed to be used in general. ^3The rated flow range indicates recommended operating range. ^4Can be used within the display range as well as within the rated flow range. ^5Flow under the zero cut flow will be displayed as 0 L/min. ^6When it is 0.05, the display flow can be set in 0.05 increments between 0.15 and 0.5L, and set in 0.01 increments for values above 0.5L. ^7FD-M5AT重复性(P) / Y (P) o±7.5%f F.S. at a response time of 0.5 s and ±5% of F.S. at a response time of 1 s. ^8Maximum 20 mA for alarm output.

Other Models