Main Unit, Hand-protection Type, 24 Optical AxesGL-R24H

GL-R24H-主机，手部保护类型，24个光轴

Data Sheet (PDF)

Manuals

Specifications

模型			GL-R24H
检测能力			Ø0.98“ø25 mm
Beam axis spacing/Lens diameter			20 mm / ø50.79" / ø0.20"
Detecting distance			0.66至49.21'0.2 to 15 m^*1
Effective aperture angle			最大限度。±2.5° (When operating distance is9.84'3 m或更多）
光源			红外LED（870 nm）
Response time (OSSD) (ms)	电线同步，一线或光学同步系统（通道0）	ON→OFF	7
		→在	49.3^*2
		All blocked→ON	64.9^*3
	Optical synchronization system (Channel A or B)	ON→OFF	9.5
		→在	53^*2
		All blocked→ON	74.7^*3
检测模式			Turns on when no interruptions are present in the detection zone
发射器和接收器之间的同步			光学同步或导线同步（通过接线确定）
Light interference prevention function			防止多达两个GL-R系统的相互干扰。 Optical synchronization: prevented by Channel A and B with setting switch 电线同步：自动预防
Control output (OSSD output)	Output		2个晶体管输出。（PNP或NPN由电缆类型确定）
	最大限度。load current		500 mA^*4
	剩余电压（在打开期间）		最大限度。2.5 V（电缆长度为16.40'5 m)
	降低州电压		最大限度。2.0 V（电缆长度为16.40'5 m)
	Leakage current		最大限度。200 µA
	最大限度。capacitive load		2.2 µF
	负载接线阻力		最大限度。2.5 Ω
补充输出 (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of16.40'5 m)
	错误输出
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	使用PNP输出电缆时	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V 电压：打开或0至3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Power supply	电压		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
	Current consumption （最大）（ma）	Transmitter	57
		接收者	72
保护电路			反向电流保护，每个输出的短路保护，每个输出的电涌保护
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 Classa，FCC Part15b Classa，ICES-003 Classa
	安全		IEC61496-1，EN61496-1，UL61496-1（4型ESPE） IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508，EN61508（SIL3），IEC62061，EN62061（SIL CL3） EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
环境阻力	Enclosure rating		IP65/IP67 (IEC60529)
	过压类别		II
	Ambient light		Incandescent lamp: 3,000 lux or less., Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C14 to 131 °F(No freezing)
	Storage temperature		-25 to +60 °C-13 to 140 °F(No freezing)
	Operating relative humidity		15 to 85 % RH (No condensation)
	存储相对湿度		15％至95％RH
	振动阻力		10至55 Hz，双振幅0.7毫米0.03“, 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s²(Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	主部案例		铝
	大写小写		尼龙（GF 30％）
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		660 g
	接收者
^1当期权前保护盖安装在发射器或接收器之一上时，操作距离会缩短1.64'0.5 m. When the front covers are installed on both of the transmitter and receiver, the Operating distance is shorten by3.28'1.0 m. ^2If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^3“All blocked” means the situation where the GL-R operates in optical synchronization system and the transmitter and receiver is not synchronized (top and bottom beam axes are both blocked). In this situation, the response time is longer because the GL-R synchronizes the transmitter and receiver fi rst and then determines the clear or blocked. ^4When the GL-R is used under surrounding air temperatures between 50 to 55°C122°F to 131°F，最大负载电流不应超过350 mA。

Other Models