苗条的1型6 beam axesGL-S16SH

GL-S16SH - Slim type 16 beam axes

Data Sheet (PDF)

Manuals

Specifications

Model				GL-S16SH
Type				Slim type
Detection capability				ø25 mmø0.98"
Beam axis spacing				20 mm0.79"
Operating distance				0.1 to 2 m0.3' to 6.6'
Effective aperture angle				Max. ±3.75° (when the operating distance is 2 m6.6')
Light source				Infrared LED (870 nm)
Response time(ms)	Wire synchronization, one-line, or optical synchronization system (channel 0)	ON→OFF		6.6^*1
		→在		48.7^*2
	Optical synchronization system (channel A or B)	ON→OFF		8.1^*1
		→在		50.9^*2
OSSD operation				Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver				Optical synchronization or wire synchronization (determined by the wiring)
Light interference prevention function				Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output type			2 transistor outputs (PNP or NPN output is determined by the cable type.)
	Max. load current			Max. 300 mA
	Residual voltage (when ON)			马克斯。2.5 V(电缆长度为5米16.4')
	OFF state voltage			Max. 2.0 V (with a cable length of 5 m16.4')
	Leakage current			Max. 200 µA
	Max. load capacitance			2.2 µF
	Load wiring resistance			Max. 2.5 Ω
Inputs 1 and 2				Short-circuit current: approx. 1 mA
Power supply	Current consumption(mA)	When the center indicator is ON	Transmitter	36^*3
			Receiver	59^*3
		When the center indicator is OFF	Transmitter	27^*3
			Receiver	49^*3
	Power voltage			24 VDC ±20%, ripple (P-P) 10% or less, Class 2
Protection circuit				Reverse current protection, short-circuit protection and surge protection for each output
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1
		EMI		EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety			IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB4584
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	Overvoltage category			II
	Ambient light			Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature			-10 to +50 °C14 to 122 °F(No freezing)
	Storage temperature			-25 to +60 °C-13 to 140 °F(No freezing)
	Operating relative humidity			15 to 85 % RH (no condensation)
	Storage relative humidity			15 to 95 % RH
	Vibration resistance			10 to 55 Hz, Double amplitude 0.7 mm0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s²(Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	Main unit case			Polyarylate
Weight	Transmitter			135 g
	Receiver			140 g
^1If the response time (ON to OFF) exceeds 20 ms, this unit cannot be used as a certified product based on the Chinese standard GB 4584 “压力机用光电保护装置技术条件”. When the GL-S units are connected in series, the response time is calculated according to the following steps; 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. ■→关闭 One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms ■ OFF→ON One sub unit connected: 42 ms Two sub units connected: 84 ms ^2If the response time (ON to OFF) exceeds 20 ms, this unit cannot be used as a certified product based on the Chinese standard GB 4584 “压力机用光电保护装置技术条件”. When the GL-S units are connected in series, the response time is calculated according to the following steps; 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. ■→关闭 One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms ■ OFF→ON One sub unit connected: 42 ms Two sub units connected: 84 ms If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^*3The control output (OSSD) current is not included. When inputs are turned ON, the current consumption increases by 1 mA per input.

Other Models