扁平类型20 beam axesGL-S20FH

GL-S20FH - Flat type 20 beam axes

Data Sheet (PDF)

Manuals

Specifications

Model				GL-S20FH
Type				扁平类型
Detection capability				ø25 mmØ0.98“
Beam axis spacing				20 mm0.79"
Operating distance				0.1 to 2 m0.3' to 6.6'
Effective aperture angle				最大限度。±3.75° (when the operating distance is 2 m6.6')
光源				Infrared LED (870 nm)
Response time(ms)	Wire synchronization, one-line, or optical synchronization system (channel 0)	ON→OFF		6.6^*1
		→在		48.7^*2
	Optical synchronization system (channel A or B)	ON→OFF		8.8^*1
		→在		52^*2
OSSD操作				Turns on when no interruptions are present in the detection zone
发射器和接收器之间的同步				Optical synchronization or wire synchronization （由接线确定）
Light interference prevention function				Optical synchronization: prevented by Channel A and B with setting switch 电线同步：自动预防
Control output (OSSD output)	Output type			2个晶体管输出 (PNP or NPN output is determined by the cable type.)
	最大限度。load current			最大限度。300 mA
	Residual voltage (when ON)			最大限度。2.5 V（电缆长度为5 m16.4')
	OFF state voltage			最大限度。2.0 V (with a cable length of 5 m16.4')
	Leakage current			最大限度。200 µA
	最大限度。load capacitance			2.2 µF
	Load wiring resistance			最大限度。2.5 Ω
Inputs 1 and 2				Short-circuit current: approx. 1 mA
Power supply	Current consumption(mA)	当中心指示器打开时	Transmitter	39^*3
			接收者	62^*3
		When the center indicator is OFF	Transmitter	28^*3
			接收者	50^*3
	电压			24 VDC ±20%, ripple (P-P) 10% or less, Class 2
保护电路				Reverse current protection, short-circuit protection and surge protection for each output
Approved standards	EMC	EMS		IEC61496-1, EN61496-1, UL61496-1
		EMI		EN55011 Classa，FCC Part15b Classa，ICES-003 Classa
	安全			IEC61496-1，EN61496-1，UL61496-1（4型ESPE） IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508，EN61508（SIL3），IEC62061，EN62061（SIL CL3） EN ISO13849-1: 2015 (Category 4, PLe) UL508, UL1998 GB4584
Environmental resistance	Enclosure rating			IP65/IP67 (IEC60529)
	过压类别			II
	Ambient light			Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature			-10至+50°C14 to 122 °F(No freezing)
	Storage temperature			-25 to +60 °C-13 to 140 °F(No freezing)
	Operating relative humidity			15 to 85 % RH (no condensation)
	Storage relative humidity			15 to 95 % RH
	Vibration resistance			10至55 Hz，双振幅0.7毫米0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance			100 m/s²(Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Material	主部案例			聚灰度
Weight	Transmitter			185 g
	接收者			190 g
^1如果响应时间（距离关闭）超过20毫秒，则该单元不能基于中国标准GB 4584“压力机光电装置条件条件”作为认证产品。当GL-S单元串联连接时，响应时间将根据以下步骤计算； 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. ■→关闭 One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms ■ OFF→ON 连接一个子单元：42毫秒连接两个子单元：84 ms ^2如果响应时间（距离关闭）超过20毫秒，则该单元不能基于中国标准GB 4584“压力机光电装置条件条件”作为认证产品。当GL-S单元串联连接时，响应时间将根据以下步骤计算； 1. Sum up the response time of all unit. 2. Subtract the following time from the result of previous step. ■→关闭 One sub unit connected: 2 ms Two sub units connected: 4.2 ms (When using Optical synchronization system and Channel A or B) One sub unit connected: 2.7 ms Two sub units connected: 5.7 ms ■ OFF→ON 连接一个子单元：42毫秒连接两个子单元：84 ms If the interruption is present in the detection zone for less than 80 ms, the response time (OFF to ON) will be 80 ms or more to ensure that the OSSD maintains the OFF state for more than 80 ms. ^*3The control output (OSSD) current is not included. When inputs are turned ON, the current consumption increases by 1 mA per input.

Other Models