Fiber Amplifier, M8 Connector Type, NPNFS-N15CN

Model

FS-N15CN

Type

IP66Fiberoptic Amplifier, 1 output type

Output

NPN

I/O format

M8 connector^*1

Main unit/expansion unit

Main unit

Control output

1 output
NPN open collector 24 V or less; maximum 100 mA or less, residual voltage 1 V or less

External input

1
Input time 2 ms (ON)/20 ms (OFF) or more (25 ms or more (ON/OFF) when external calibration is selected.)

Output toggle

Light-ON/Dark-ON switchable

Light source LED

Red 4-element LED (wavelength 630 nm)

Timer function

Timer OFF/OFF delay/ON delay/One-shot

Response time

50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA)

Number of interference prevention units

0 units (expansion not possible)

Case size

H30.3mm1.19"x W9.8mm0.39"x L71.8mm2.38"

Unit expansion

0 units (expansion not possible)

Protection circuit

Reverse polarity protection, Over-current protection, Surge absorber

Rating

Power voltage

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Current Consumption

Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)^*2
Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)^*2
Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

Environmental resistance

Enclosure rating

IP66^*3*4

Ambient light

Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less

Ambient temperature

-20 to +55 °C-4 to 131 °F(No freezing)

相对湿度

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s², 3 times in each of the X, Y, and Z directions

Material

Adapter

Glass-reinforced PBT

Weight

Approx. 30 g