
Digital Fiber Optic Sensors
FS-V20 series
Recommended Replaceable Products:Digital Fiber Optic Sensor - FS-N40 series
Contact Us:1-888-539-3623Inquiry form
Fiber Amplifier, Cable Type, Expansion Unit, PNPFS-V22RP
Specifications
Model |
FS-V22RP |
|||
Type |
1-line expansion unit, PNP |
|||
Light source LED |
Red LED |
|||
Response time |
250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED) |
|||
Output selection |
Light-ON/Dark-ON selectable |
|||
Indicator lamp |
Operation indicator: Red LED |
|||
Detection mode |
Light intensity/rising edge/falling edge |
|||
Shift function |
Max. ±1,999 (variable) |
|||
Timer function |
Mode |
Timer OFF/OFF-delay timer/ON-delay timer/One-shot timer, selectable |
||
Variable range |
1 to 500 ms |
|||
Accuracy |
±10 % of the Preset Value |
|||
Control output |
100 mA max. (40VDC max), Residual voltage: 1Vmax. |
|||
Rating |
Power voltage |
12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
||
Power consumption |
Normal |
S-APC OFF: 650 mW max.(27 mA max. at 24 VDC), S-APC ON: 720 mW max.(30 mA max. at 24 VDC)*1 |
||
ECO half |
S-APC OFF: 530 mW max.(22 mA max. at 24 VDC), S-APC ON: 660 mW max.(25 mA max. at 24 VDC)*1 |
|||
ECO all |
S-APC OFF: 480 mW max.(20 mA max. at 24 VDC), S-APC ON: 550 mW max.(23 mA max. at 24 VDC)*1 |
|||
Environmental resistance |
Ambient light |
Incandescent lamp: 20,000 lux max., Sunlight: 30,000 lux max. |
||
Ambient temperature |
-10 to +55 °C14 to 131 °F(No freezing)*2 |
|||
相对湿度 |
3.5 to 85 % RH (No condensation) |
|||
Vibration resistance |
10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions |
|||
Shock resistance |
500 m/s2, 3 times in each of the X, Y, and Z directions |
|||
Case material |
Polycarbonate |
|||
Weight |
Approx. 45 g (including 2-m cable) |
|||
*1S-APC will be always turned ON when the high-resolution or high-speed mode is selected. S-APC is by default set to OFF in any other mode. |
||||
