数字光纤传感器

FS-V30 series

CatalogsView Catalog

Fiber Amplifier, M8 Connector Type, Main Unit, PNPFS-V33CP

FS-V33CP - Fiber Amplifier, M8 Connector Type, Main Unit, PNP

  • CE Marking
  • UL Listing(c/us)

Specifications

Model

FS-V33CP

Type

2-output with
M8 connector

Output

PNP

主单元/扩展单元

Main unit

Control output

2 outputs

Monitor output (1 to 5 V)

N/A

External input

Connector

M8

Light source LED

Red, 4-element LED (Wavelength: 640 nm)

Response time

33 µs(高速) /250 µs /500 µs(涡轮) /1毫秒(超涡轮) /4 ms(Ultra Turbo) /16 ms(Mega Turbo)

Output selection

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator

Operation indicator: Red LED/Dual digital monitor: Dual 7-segment display, Preset Value (4-digit green LED indicator) and
Current Value (4-digit red LED indicator) illuminated together. Current Value range: 0 to 64,512; Excess gain: 0P to 999P,
Hold function: Possible to display both peak and bottom hold values, Selectable from 5 variations
Bar LED monitor: Excess gain displayed (85% to 115% in 7 steps), Scaling display

大小

30.3毫米(H)X 9.8毫米(W)X 71.8毫米(D)1.19" (H) x 0.39" (W) x 2.83" (D)

检测模式

Light intensity (area detection possible, automatic sensitivity-tracking function provided)/
[Limited light intensity/Count check/Abnormality detection]

Timer function

OFF-delay timer/ON-delay timer/One-shot timer/ON-delay timer + OFF-delay timer/ON-delay timer + One-shot timer, selectable
Timer duration selectable: 0.1 ms to 9,999 ms, Maximum error against the setting value: ±10% max.

Control output

PNP open-collector 24 V, 100 mA max.*1(main unit only)/20 mA max. (when the expansion unit(s) is connected), Residual voltage: 1 V max.

External inputy

Input time: 2 ms (ON)/20 ms (OFF) min.*2

单位扩展

可以连接多达16个扩展单元(总共17个单位)。请注意,2输出类型应计算为两个单元。

Number of interference prevention units

普通手术

HIGHSPEED:0 FINE:4 TURBO/SUPER/ULTRA/MEGA:8台

Rating

电压

12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less

Power consumption

Normal: 830 mW max. (Using 24 V, 35 mA max., using 12 V, 45 mA max.)/
Power saving 660 mW max. (Using 24 V, 27 mA max., using 12 V,
32 mA max.)*3

Environmental resistance

Ambient light

白炽灯:20,000 Lux Max。,Sunlight:30,000 Lux Max。

Ambient temperature

-10 to +55 °C14 to 131 °F(No freezing)*4

相对湿度

35 to 85 % RH (No condensation)

振动阻力

10至55 Hz,双振幅1.5毫米0.06", 2 hours in each of the X, Y, and Z directions

Shock resistance

500 m/s2, 3 times in each of the X, Y, and Z directions

Case material

Polycarbonate

配件

N/A

Weight

Approx. 22 g

*1Total current of two outputs should be less than 100 mA.
*2仅在某些型号上可用。
*3When using the HIGH SPEED mode, the power consumption increases by 160 mW (7 mA).
*4If more than one unit is used together, the ambient temperature varies with the conditions below. Mount the units on the DIN rail with mounting brackets and check that the output current is 20 mA or less.
1 to 2 Units: -10 to +55 °C14 to 131 °F, 3 to 10 Units: -10 to +50 °C14 to 122 °F, 11 to 16 Units: -10 to +45 °C14 to 113 °F

Other Models