Amplifier UnitAT-V501HP

Model

AT-V501HP

Sensor head interchangeability

Yes

Display

Display
system

Measurement
value display

7-segment 2-color LED (green and red)

Sub display

7-segment 1-color LED (red)

Common

Minimum display
resolution

0.1 µm0.004 Mil

Display range

-99999 to 99999

Display speed

20 times/second

Over-range alarm

±FFFFF is displayed.

Sampling rate

2000 times/second

Control input

Timing input

15 to 30 V is applied.

Reset input

Auto-zero input

External setting input

Control output

Setting method

Upper/lower 2-level setting x 4 patterns (selectable)

HIGH/GO/LOW

PNP open-collector: 50 mA max. (30 V max),Residual voltage: 0.5 V max (N.C.)

Response time

1.5 ms (at maximum speed)

Off-delay time

60 ms (ON/OFF selectable)

Alarm output

PNP open-collector: 50 mA max. (30 V max),Residual voltage: 0.5 V max (N.C.)

Analog output voltage

Output range

±0.5 V

Impedance

100 Ω

Response time

4.5 ms (at maximum speed)

RS-232C interface

Measurement data outputs and control inputs

温度查racteristics

0.01% of F.S./°C^*1

Major functions

Auto-zero function, Offset function (4 sets), Measurement modes (7 types), Judgment value memory function (4 sets),Statistical processing display function, Average function, Internal trigger function, Calibration function,Decimal point/display digit change function, Analog output scaling function, and ECO mode

Rating

Power voltage

24 VDC ±10 %, Ripple (P-P) 10 % or less

Current consumption

150 mA or less

Environmental resistance

Ambient temperature

0 to +50 °C32 to 122 °F

相对湿度

35 to 85 % RH (No condensation)

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm0.06", 2 hours in each of the X, Y, and Z directions

Weight

Approx. 200 g