带有内置AI的视觉传感器

IV3 series

CatalogsView Catalog

Smart camera Wide field of view sensor model Monochrome AF typeIV3-600MA

规格

Model

IV3-600MA

Type

Wide view type

Installed distance

50 to 2000 mm1.97“至78.74”

Tools

Available modes

标准mode / Sorting mode

具有标准模式的工具

Learning, Outline, Color area*1, 区域*2,,,,Edge pixels, Color average*1,,,,Brightness average*2,宽度,直径,边缘存在,音高,
OCR, Color prohibit*3,亮度禁止,位置调整,高速位置调整(1轴边缘/2轴边缘),斑点计数

Number of tools

Total: 17 tools*4

Field of view

安装距离50毫米1.97":51(h)×38(v)mm2.01“(H)×1.50”(V)
Installed distance 2000 mm78.74": 1822 (H) × 1364 (V) mm71.73" (H) × 53.70" (V)

切换设置(程序)

128 programs (when using SD card) / 32 programs (when not using SD card)

Image receiving element

Type

1/2.9英寸
monochrome CMOS

Number of pixels

1280 (H) × 960 (V)

图像历史

Number of storable images

100张图像*5

保存条件

仅在NG,NG和OK接近阈值之间可选*6,,,,and All*5

重点调整

Auto*3

Image data transfer

转移目的地

Selectable between SD card, FTP server and SFTP server

传输格式

可以在BMP,JPEG,IV3P和TXT之间进行选择,并且可以修改文件名

转移条件

仅在NG,NG和OK接近阈值之间可选*7,,,,and All

Exposure time

12 μs to 10 ms

分析信息

运行显示

Tools list (Judgment results, degree of similarity, or degree of similarity bar display)*7

运行信息

可切换between OFF, histogram, processing time, count, and output monitor
Histogram: Histogram, degree of similarity (Max., Min., Ave.), Number of OKs, Number of NGs
Processing time: Processing time (latest, Max., Min., Ave.)
计数:触发数字,OK数量,NG数量,触发错误,频闪错误
输出监视器:按输出进行开/关状态
*7

Lights

Illumination

红外领导

Lighting method

脉冲照明

其他功能

图像捕获功能

数字变焦(2×,4×),HDR,高增益,颜色过滤器*1, 白平衡*1,,,,Brightness correction, AI capture

Tool functions

Additional learning, Mask outline, Masking function, Color extraction/exclusion*1,颜色直方图功能*1,,,,Monochrome histogram function*2,缩放函数

Utilities

传感器列表失败,故障保留,测试运行,I/O监视器,安全设置(两因素密码),模拟器*8,其他FTP/SFTP图像信息,
多位置调整,多主机图像注册,高速程序切换,自动程序切换

Indicators

OUT,TRIG,状态,链接/ACT,SD

Input

Type

在非电压输入和电压输入之间可切换
对于无电压输入:在电压2 V或较低的电压上,电流0.1 mA或更低,电流2 MA(短路)(短路)
对于电压输入:最大输入额定值26.4 V,在电压18 V或更高的电压上,电流0.15 mA或更低,电流2 MA(对于24 V)

Number of inputs

6 ports, 3 ports are selectable as IN/OUT

Function

1:外部触发器,
IN2, IN3, I/O1 to I/O3: Enable by assigning optional functions
Assignable functions: Program switching, Clear error, External master image registration, SD card save cancel

输出

Type

照片MOS继电器输出,N.O./N.C。可切换
最大额定值26.4 V 50 MA,残余电压1.5 V或更少*9

输出数量

6 ports, 3 ports are selectable as IN/OUT

Function

通过分配可选功能启用
可分配功能:总判断(确定/ng),运行,忙碌,位置调整结果,每个工具的判断结果,每个工具的逻辑操作的结果,
Error, SD card error, Variety discrimination result

电力/i/o

连接器

M12 12针代码男性连接器

POE Power类3/4/6*10

以太网

标准

1000base-t/100base-tx

连接器

M12 8 pin X code Female connector

Network function

FTP client, SFTP client

接口兼容性

Built-in Ethernet

以太网/IP™,TCP/IP非过程通信

扩展的内存

microSD卡(microSD/microSDHC)*11

Ratings

Power voltage

24 VDC ±10% (including ripple)

Current consumption

3.3 A或更少(没有AI照明单元,包括输出负载)
1.8 A或更少(AI照明单元,包括输出负载)*12

Environmental resistance

外壳等级

IP67*13

环境温度

0至 +40°C32至104°F((No freezing)

相对湿度

35至85%RH(无凝结)

Vibration resistance

10 to 55 Hz; double amplitude 1.5 mm0.06“; 2 hours in each of the X, Y, and Z directions*14

阻力性

500 m/s2,,,,1640'/s26 times in each of the 3 directions*14

材料

主要单位案例:铝制铸造
指示灯封面:TPU
以太网连接器:铜合金 + NI电镀
Front cover: Acrylic (hard coating)
电源连接器:PA/POM
Nameplate: PC
电源连接器的防水盖:PC+ABS合金
Water proof cap for the Ethernet connector: PC

重量

大约300克10.59盎司((without the AI Lighting unit)
大约495 g17.47 oz((with the AI Lighting unit)

*1Color type only.
*2仅单色类型。
*3The focusing position can be automatically adjusted at the time of installation. Disabled during operation. The focusing position can be registered by programs.
*4工具可以通过程序安装。这是检测工具和位置调整工具的数量。最多可以设置16个检测工具。排序模式中的检测工具的数量是一种工具(学习工具)。
*5Saves to the sensor's internal memory. The images saved to the sensor can be backed up to a USB memory stick inserted into the control panel (IV3-CP50) or to the PC where the software for the IV3 Series (IV3-H1) is being used.
*6Learning tool only.
*7Can also be displayed on the control panel (IV3-CP50) or the software for the IV3 Series (IV3-H1).
*8在IV3系列(IV3-H1)的软件上可用。
*9Make sure to keep a total of each output with 120 mA or less.
*10对于POE电源设备,使用AI照明单元时建议使用IEEE802.3AT Power Clast 4或更高版本,并且在不使用AI照明单元时,建议使用IEEE802.3BT Power Clast 6或更高。当使用少于推荐电源类别的设备时,由于功率限制,操作可能会受到限制。
*11Use only products recommended by KEYENCE.
*12如果安装了AI照明单元,则峰值电流的设计为较小。如果未安装AI照明单元,则峰值电流更大
*13Except when the polarizing filter (OP-88640/OP-88641/OP-88644/OP-88645) is mounted.
*14除了安装圆顶附件(IV3-D10)时。

其他型号