Spot Type Main Unit, Head Cable 2-m and CAB NeedleSJ-M021G

SJ-M021G - Spot Type Main Unit, Head Cable 2-m and CAB Needle

Data Sheet (PDF)

Manuals

Specifications

Model		SJ-M021G
Type		Static Elimination Head
Voltage application method		Pulse AC method
Applied voltage		±5.5 kV
Rated output voltage		±6 kV
Ion balance control method		I.C.C. method
Static elimination time		0.5 sec max.^*1
Ion balance		±15 V or less^*2
Supply pressure range		0.001 to 0.5 MPa^*3
Min. air pressure	With SJ-ML	0.02 MPa (20 Nl/min)
	With SJ-MS/ML1	0.03 MPa (20 Nl/min)
	With SJ-MS/ML2	0.02 MPa (20 Nl/min)
	With SJ-MS/ML3	0.08 MPa (50 Nl/min)
	With SJ-MS/ML4
Control input	Static elimination stop input	Non-voltage input
Control output	Alarm output	NPN型集电极开路100 mA (40 V or less)
	Ion level alarm output
	Condition alarm output
Rating	Power voltage	24 VDC ±10 %
	Current consumption	450 mA or less
Environmental resistance	Ambient temperature	0 to +80 °C32 to 176 °F^4^5
	相对湿度	35 to 65 % RH
Weight		Approx. 600 g
^1At installation distance 50 mm1.97", air flow 60 Nl/min (ambient temperature 20 to 30 °C68 to 86 °F, relative humidity 40 to 60 %) ^2Values obtained at an installation distance of 50 mm1.97"and air flow rate of 20 Nl/min [ambient operating temperature +20 to +30 °C+68 to +86 °F, ambient operating humidity 40 to 60 % RH] (without nozzle) ^3Inquire for derating of humidity/pressure in environments exceeding +35 °C95 °F. Use clean or dry air at a temperature of -20 °C-4 °For less. Min. air pressure varies by nozzle used. ^4Use a supplied fluid with a temperature of 40 °C104 °For less. ^*5Only for the pressure cable. Other parts should be used with an ambient temperature of 0 to 40 °C104 °F.

Other Models