Vision Sensor with Built-in AI

IV3系列

目录查看目录

Smart camera Standard model Color AF typeIV3-500CA

Specifications

模型

IV3-500CA

类型

标准类型

安装距离

50至2000毫米1.97“to 78.74"

工具

可用模式

标准模式 /排序模式

Tool with standard mode

学习,轮廓,颜色区域*1, Area*2,边缘像素,颜色平均*1,亮度平均值*2, Width, Diameter, Edge presence, Pitch,
OCR,颜色禁止*3, Brightness prohibit, Position adjustment, High-speed position adjustment (1-axis edge/2-axis edge), Blob count

工具数量

总计:17个工具*4

视场

安装距离50 mm1.97“:22(h)×16(v)mm0.87“(H)×0.63”(V)to
安装距离2000毫米78.74“:789(h)×592(v)mm31.06“(H)×23.31”(V)

Switch settings (programs)

128个程序(使用SD卡时) / 32个程序(不使用SD卡时)

图像接收元素

类型

1/2.9 inch
彩色CMO

像素数

1280(H)×960(V)

Image history

存储图像的数量

100 images*5

Save conditions

Selectable between NG only, NG and OK near threshold*6, 和所有*5

Focus adjustment

汽车*3

图像数据传输

Transfer destination

在SD卡,FTP服务器和SFTP服务器之间可选

Transfer format

Selectable between bmp, jpeg, iv3p, and txt, and file names can be modified

Transfer conditions

Selectable between NG only, NG and OK near threshold*7, 和所有

接触时间

12μs至10毫秒

Analysis information

RUN display

工具列表(判断结果,相似程度或相似性栏显示程度)*7

RUN information

在OFF,直方图,处理时间,计数和输出监视器之间可切换
直方图:直方图,相似程度(最大,最小,大街),OKS数量,NGS数量
处理时间:处理时间(最新,最大,最小,大街)
数:触发麻木ers, Number of OKs, Number of NGs, Trigger errors, Strobe errors
Output monitor: ON/OFF status by output
*7

照明

白领导

照明方法

脉冲照明/连续照明是可切换的。

Other functions

Image capture function

Digital zoom (2×, 4×), HDR, High gain, Color filter*1, White balance*1,亮度校正,AI捕获

工具功能

其他学习,掩码轮廓,掩蔽功能,颜色提取/排除*1, Color histogram function*1,单色直方图功能*2, Scaling function

公用事业

Failing sensor list, Failure hold, Test run, I/O monitor, Security settings (Two-factor password), Simulator*8, Additional FTP/SFTP Image Information,
Multi-position adjustment, Multi-master image registration, High-speed program switching, Auto program switching

指标

OUT, TRIG, STATUS, LINK/ACT, SD

输入

类型

Switchable between non-voltage input and voltage input
For no-voltage input: ON voltage 2 V or lower, OFF current 0.1 mA or lower, ON current 2 mA (short circuit)
For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, OFF current 0.15 mA or lower, ON current 2 mA (for 24 V)

输入数量

6个端口,3个端口可供选择,如in/out

功能

IN1: External trigger,
in2,in3,i/o1至i/o3:通过分配可选功能启用
可分配功能:程序切换,清晰错误,外部主图像注册,SD卡保存取消

Output

类型

Photo MOS relay output, N.O./N.C. Switchable
Maximum rating 26.4 V 50 mA, residual voltage 1.5 V or less*9

Number of outputs

6个端口,3个端口可供选择,如in/out

功能

Enable by assigning the optional functions
Assignable functions: Total judgment (OK/NG), Run, Busy, Position adjustment result, Judgment result of each tool, Result of the logical operation of each tool,
错误,SD卡错误,品种歧视结果

Power/I/O

Connector

M12 12 pin A code Male connector

PoE

PoE power Class 3/4/6*10

Ethernet

Standard

1000BASE-T/100BASE-TX

Connector

M12 8引脚X代码女性连接器

网络功能

FTP客户端,SFTP客户端

Interface compatibility

内置以太网

EtherNet/IP™, TCP/IP non-procedure communication

Expanded memory

microSD card (microSD/microSDHC)*11

评分

电压

24 VDC±10%(包括波纹)

目前的消费

3.3 A or less (without the AI Lighting unit, and including the output load)
1.8 A or less (AI Lighting unit, and including the output load)*12

环境阻力

Enclosure rating

IP67*13

Ambient temperature

0 to +40°C32 to 104°F(没有冷冻)

相对湿度

35 to 85% RH (No condensation)

振动阻力

10至55 Hz;双振幅1.5毫米0.06";每个X,Y和Z方向的每个两个小时*14

Shock resistance

500 m/s2,1640'/s2在这3个方向中的每一个中有6次*14

Material

Main unit case: Aluminum die-casting
Indicator light cover: TPU
Ethernet connector: Copper alloy + Ni plating
封面:丙烯酸(硬涂层)
Power connector: PA/POM
铭牌:PC
Water proof cap for the Power connector: PC+ABS alloy
以太网连接器的防水帽:PC

Weight

大约300 g10.59 oz(没有AI照明单元)
大约495克17.47盎司(带有AI照明单元)

*1仅颜色类型。
*2Monochrome type only.
*3在安装时可以自动调整聚焦位置。在操作过程中禁用。聚焦位置可以通过程序注册。
*4工具can be installed by programs. This is the number of detection tools and position adjustment tools. Up to 16 detection tools can be set. The number of detection tools in Sorting mode is one tool (learning tool).
*5保存到传感器的内部内存中。可以将保存到传感器的图像可以备份到插入控制面板(IV3-CP50)的USB内存棒或使用IV3系列软件(IV3-H1)的PC。
*6仅学习工具。
*7也可以显示在控制面板(IV3-CP50)或IV3系列(IV3-H1)的软件上。
*8Usable on the software for the IV3 Series (IV3-H1).
*9确保以120 mA或更少的速度保持每个输出的总数。
*10For a PoE power supply device, IEEE802.3at power class 4 or higher is recommended when using the AI Lighting unit, and IEEE802.3bt power class 6 or higher is recommended when the AI Lighting unit is not used. When using a device with less than the recommended power class, operation may be restricted due to power limitation.
*11仅使用Keyence推荐的产品。
*12The peak current is designed to be smaller if the AI Lighting unit is mounted. The peak current is greater if the AI Lighting unit is not mounted
*13除非载入极化过滤器(OP-88640/OP-88641/OP-88644/OP-88645)。
*14Except when the dome attachment (IV3-D10) is mounted.

Other Models