
Ultra High-Speed/High-Accuracy Laser Displacement Sensor
LK-G5000 series
Controller, PNP TypeLK-G5001P
Specifications
Model |
LK-G5001P |
|||
Type |
Separate type Main controller |
|||
Sensor head compatibility |
Compatible |
|||
No. of connectable sensor heads |
2 |
|||
Display |
Minimum display unit |
0.001 µm |
||
Display range |
±999.999 µm to ±9999.99 mm (7 settings selectable) |
|||
Display cycle |
Approx 10 times/sec. |
|||
Display interface |
Display port |
Either the display unit (LK-HD500) or dedicated touch panel (LK-HD1001) can be connected |
||
LED indicator |
LASER ON |
|||
Terminal block |
Analog output voltage |
±10 V output, Output impedance: 100 Ω*1 |
||
Analog current output |
4 to 20 mA, Maximum load resistance: 350 Ω*1 |
|||
No. of analog outputs |
2*1 |
|||
TIMING 1 input |
Voltage input*2 |
|||
RESET 1 input |
||||
Auto-zero 1 input |
||||
Laser remote input |
Non-voltage input*1 |
|||
Alarm output |
PNP型集电极开路output*1 |
|||
General comparator output |
||||
Expansion connector |
TIMING input |
Voltage input*1 |
||
RESET input |
||||
Auto-zero input |
||||
Program switching input |
||||
Binary selection input |
||||
Alarm output |
PNP型集电极开路output*1 |
|||
Comparator output |
||||
Binary output |
||||
RS-232C interface |
Baud rate: 9600 to 115200 bps |
|||
USB interface |
USB 2.0 Hi-Speed compliant*3 |
|||
Ethernet interface |
100Base-TX/10Base-T*4 |
|||
EtherNet/IPTMinterface |
Cyclic communication (implicit messaging) |
|||
PLC-Link |
The following PLCs are supported:Mitsubishi Electric: MELSEC iQ-R Series, iQ-F Series, Q Series, L Series, FX Series |
|||
Head expansion unit connector |
Up to 10 head expansion units can be connected to one main controller |
|||
Expansion unit connector |
Either of the CC-Link unit (LK-CC100) or DeviceNetTMunit (LK-DN100) can be connected |
|||
Power supply |
Power supply voltage |
24 VDC ±10% |
||
Maximum current consumption |
0.6 A or less with 1 head/3.5 A or less with 12 heads |
|||
Environmental resistance |
Ambient temperature |
When one or less head expansion unit is connected: 0 to +50 °C32 to 122 °F. |
||
相对湿度 |
35 to 85 % RH (No condensation) |
|||
Weight |
Approx. 600 g |
|||
*1NPN open-collector output rating: 50 mA max. (40 V max.), Residual voltage: 0.5 V max. |
||||

