Sensor Main Unit 150A/200A TypeFD-R200

FD-R200 - Sensor Main Unit 150A/200A Type

Data Sheet (PDF)

Manuals

Specifications

模型		FD-R200
Supported pipe diameter		6“（150 a），Ø152至Ø1915.98" to 7.52" 8“（200 a），Ø191至Ø2207.52" to 8.66"
188bet在线支撑的管道材料		Metal / resin^*1
Supported fluids		各种液体（即水，油，化学物质）^*1
188bet在线支持的流体温度		- 20 to + 120°C- 4.0 to + 248 °F(no freezing on the pipe surface)^*2
Maximum rated flow		额定流速范围：5.0 m/s Flow rate range (Typical): 6" (150 A): 5500 L/min 1400 gal/min 330 m³/h 8"(200 A): 9500 L/min 2500 gal/min 570 m³/h
Zero cut flow rate		零切割：0.3 m/s（默认）^*3 流速（典型）：570 l / min 150加仑 / min 36 m³/ h
Display method		Dual row, 5-digit display with white, 14-segment LED; Large status indicator; Output indicators; Stability indicator; Unit indicator
Display update cycle		大约3赫兹
Display resolution		1（l / min）
Response time		0.5 S / 1.0 S / 2.5 S / 5.0 S / 10.0 S / 30.0 S / 60.0 S / 120.0 S / 200.0 S（变量）
测量精度		Between 20 and 100% of F.S. : ±2.0% of RD^4^5 Between 6 and 20% of F.S. : ±0.4% of F.S.^4^5
保护电路		电源反向连接保护，电源电源保护，每个输出的短路保护，每个输出的电涌保护
Zero point error		F.S.的±0.5％^4^6
Hysteresis		多变的
流动单位		L / min, m³/ h, gal / min
集成流动单元显示		1/10 / 100/1000 / 10000（L）
管道温度测量精度		±3°C±5.4°F（液体温度为-20至 + 50°C，- 4 to + 122°F) ±5°C±9°F(liquid temperature of 50 to + 120°C,122 to 248°F) (ambient operating temperature of 25°C77°F)^*4
Wiring specifications	Power supply	DC power supply: M12 4-pin connector / AC power supply: M4 screw terminal block (selectable)
	I / O	When using a DC power supply: M12 4-pin connector / when using an AC power supply: M3 screw terminal block
Input/Output (Selectable)	Output (ch.1/ch.2)	Control output / Integrated pulse output / Error output / Temperature alarm, NPN / PNP setting switchable,open collector output 30 VDC or less, max. 100 mA / ch., residual voltage: 2.5 V or less^*7
	Analog output (ch.1/ch.2)	Flow rate analog output / Temperature analog output and 4 - 20 mA / 0 - 20 mA (selectable), load resistance: 500 Ω or less^*7
	External input (ch.2)	集成流动重置输入 /流量零输入 /原点调整输入（可选），短路电流：1.5 mA或更少，输入时间：20 ms或更多^*7
Rating	电压	20 to 30 VDC including 10% ripple (P-P), Class 2 / 100 to 240 VAC - 15% or + 10% (50 / 60 Hz)
	目前的消费	使用直流电源时：使用AC电源时，在200 ma或更少（不包括负载电流），400 mA或更少（包括负载电流）：15 VA或更少
环境阻力	Enclosure rating	IP65 / 67（IEC60259），IP69K（ISO20653），外壳类型4X（NEMA250）
	Ambient temperature	- 20 to + 60°C- 4.0 to 140 °F(no freezing)^*2
	相对湿度	5 to 90%RH (no condensation)
	振动阻力	10至55 Hz，复合振幅1.5毫米0.06", XYZ axes 2 hours for each axis
	Shock resistance	100 m/s², 16 ms pulse, XYZ axes, 1000 times for each axis
Dimensions		Main unit size: 218.5 mm × 66.9 mm × 70.7 mm8.60“×2.63”×2.78“
Material	Main unit	Body: aluminum die-casting + coating / PPS, display: reinforced glass, connectors: SUS304-equivalent
	单位后部	橡胶
	Upper/lower bracket	SUS304
Weight		Main unit: Approx. 1.0 kg Upper/lower bracket: Approx.2.5 kg (including sub unit)
^1Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Detection may be unstable due to the type and status of the pipes. ^2使用交流电源时，根据环境温度和液体温度执行脱落。 ^3The zero cut flow rate can be changed in the settings. ^4钥匙检查设施可以保证此值。误差将由管道的类型和状态，流体的类型和温度以及零切口流量引入。 ^5This is the value when considering linearity + span error + repeatability in a stable environment of 25°C77°F. ^6It is possible to enhance the precision of zero point error by performing an origin adjustment. ^*7IO-Link: Compatible with Specification v1.1 / COM2 (38.4 kbps) The setting file can be downloaded from the KEYENCE website. If using the unit in an environment where downloading the file is not accessible via Internet, contact your nearest KEYENCE office. IO-Link is either registered trademarks or trademarks of PROFIBUS Nutzerorganisation e.V. (PNO)

Other Models