Main Unit, Robust Type, 24 Optical AxesSL-C24HM

SL-C24HM - Main Unit, Robust Type, 24 Optical Axes

Data Sheet (PDF)

Manuals

CAD Data

360°view (3D PDF)

Data Sheet (PDF)

Specifications

Model			SL-C24HM
Effective aperture angle			Max. ±2.5° (when operating distance is at least 3 m9.8')
Response time			15毫安^*1
Light source			Infrared LED (850 nm)
Detection capability			Ø25mm（未使用消隐功能时）
Operation mode			Turned on when light is being applied to all optical axes (excluding when the blanking function is used)
No. of beam axes			24
Detection zone			460 mm18.11"
Protection area			505 mm19.882"
DetectingdistanceTransmitter lens: Norbornene plasticReceiver lens cover: Polyarylate			0.25 to 9 m
Beam axis interval			20 mm0.79"
Lens diameter			―
OSSD output	Output type		2 outputs each for PNP and NPN, Can be switched using the connection connector cable
	Max. load current		300 mA^*2
	OFF-state voltage		2.5 V（电缆长度为7米23.0')
	Leakage current		100 µA maximum^*3
	Max. capacitive load		2.2 µF (with a load resistance of 100 Ω)
	Load wiring resistance		2.5 Ω maximum^*4
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 Class A, FCC Part15 Class A
	安全		IEC61496-1, EN61496-1, UL61496-1 (type 4 ESPE),IEC61496-2, EN61496-2, UL61496-2 (type 4 AOPD),UL508
Current consumption	Transmitter		68 mA
	Receiver		76 mA
Rating	Power voltage		24 VDC ±10 %, Ripple (P-P) 10 % or less
Environmental resistance	Enclosure rating		IP65 (IEC60529)^*5
	Ambient light		Incandescent lamp: 5,000 lux or less, Sunlight: 20,000 lux or less
	Operating ambient temperature		-10 to +55 °C14 to 131 °F(No freezing)
	Storage temperature		-10 to +60 °C14 to 140 °F(No freezing)
	Operating relative humidity		35 to 85 % RH (No condensation)
	Storage relative humidity		35 to 95 % RH (No condensation)
	Vibration resistance		10 to 55 Hz, Double amplitude 0.7 mm0.03", 20 sweeps in each of the X, Y, and Z directions
	Shock resistance		100 m/s²(Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
Weight	Transmitter		Approx 1.8 kg
	Receiver
^1OFF→返回时间为125毫秒。 ^2Note the derating illustrated in the graph to the right when using PNP output. ^3This includes situations in which the SL-C Series is off and in which the power supply line is disconnected. ^4The wiring resistance between the OSSD output and the connected equipment (excluding the wiring resistance of the optional dedicated cable) must be 2.5 Ω or less to ensure that the SL-C Series operate correctly. If using the NPN output ^*5The SL-CHM Series attains a protection rating of IP65 because the main unit's sensor is enclosed in an aluminum case.

Other Models